Manifoldabsolute pressure Manifold air pressure detected by the intake air pressure sensor. Intake air temperature Intake air temperature detected by the intake air temperature sensor. Barometric pressure Barometric pressure detected by the atmospheric pressure sensor. Battery voltage Battery voltage (some models require engine start-up) O2 Mainfunction: The intake air pressure sensor is mainly used to measure the intake air flow to ensure the normal operation of the excavator engine. Manifold absolute pressure, Intake air and Ambient Air sensors. Superchargers are mounted on the intake side of the engine and are typically belt driven to force more air into the intake, with no Page146 Air intake injection system FUEL PRESSURE REGULATOR The fuel pressure regulator is a diaphragm pressure release valve that consists of a diaphragm, spring and valve. It always maintains the pressure of the fuel sent to the injector at 3,5 kg/cm (350 kPa). 5B-Ground; 5C-serial line TX) Instrument panel Main relay Air pressure sensor BlackSmoke from Engine - if there's black smoke coming from your engine, then this can be the result of a bad IAT sensor. This can happen if the PCM is unable to mix the air-to-fuel properly because the Intake Air Temperature system was unable to provide it with the correct signal. Engine Overheating - If you notice that your engine is ABOUTTHE REVIVA VT365. All Reviva engines are assembled in the USA. Blocks, heads, and crankshafts are 100% magnaflux tested to avoid cracked components. Crankshaft is checked for size, reground, if necessary, and micropolished to OEM specifications. Camshaft is checked for wear, reground as necessary, and micropolished to OEM specifications. Vay Tiền Nhanh Chỉ Cần Cmnd Nợ Xấu.

letak intake air pressure sensor mio j